Course Content
Disclaimer and Safety Guidelines
Drive, Train and Autopilot
Power Off the Donkey Car
Donkey Car S1: Getting Started Guide
About Lesson

Put the battery into the compartment

Put the battery into the battery compartment.

Make sure the battery cable is properly extended from the battery compartment.
Secure the battery using the battery cover and the pin.

Connect the battery to MM1

There is cable which one end connecting the MM1 IN port and another end is a mini tamiya plug (pointed by the yellow arrow).

Connect the battery to this cable like this:
You should see the MM1 in blinking a few times.

Switch on the ESC

In most case, the ESC is switched on by default. If it is not switched on, switch it on now by flipping the switch to the right hand side.